KAHLONestd. 1989
Live chat by Kahlon
Home : FAQs : FAQ Detail



I have installed Kahlon memory and my system boots up fine but did not detect Kahlon memory

Please try following steps, one step at a time to tackle this issue

 

  • Please make sure that new module is pushed all the way down in to the socket. If memory module is defective and is seated properly then your computer will either beep or will give you an error code. This kind of problem is normally caused by improperly seated module. Please try again and make sure to push it all the way down and system power should be off during installation.

 

  • Please turn off the power to your system and remove Kahlon module and use pencil eraser to clean memory module gold contacts and make sure that memory socket is also dust free and reseat the module.

 

  • Please turn off the power to your system and try installing Kahlon module in a different socket if more than one socket is available.

 

  • Please turn off the power to your system and try installing Kahlon module alone in the system.

 

  • Please check Kahlon part number and make sure that you have ordered correct module for you computer.